UNCOMPROMISING BEAUTY AND ABSOLUTE QUALITY.
ILUX is a special gloss lacquer finish.
Its exceptional shine – corresponding to 96-97 gloss – results from an accurate UV lacquering cycle applied to a semi-finished panel faced with melamine resins in exactly the same colour, delivering aesthetic perfection and a refined visual appeal that adds depth to the finish.
ILUX lacquers, applied to an MDF base, are available in 8 standard colours readily available in our warehouse. Moreover, on request both come in a very rich variety of colours aligned with the demands of a furniture market that is ready to satisfy new trends as well as more widespread tastes.
AVAILABLE ON REQUEST
AVAILABLE IN THE SAME COLOURS AS THE PANELS.
On request, TPS can also supply different edging materials for doors made from IXTEX MATT, IXTEX WOOD and ILUX panels.
WHY YOU SHOULD CHOOSE
The ASA (Antibacterial Silver Action) treatment applied on request reduces the growth of surface bacteria in 24 hours by 99% thanks to a silver ion-based additive used in the coating cycle. Moreover, ASA guarantees that this anti-bacterial action lasts over time while leaving the characteristics of the finishes unchanged, including their high chemical and mechanical resistance.
Tests performed by cutting-edge systems
The compliance of our products with high quality standards is proven by strict tests and quality controls performed using some of the most accurate optical and electronic systems in the world. Any panels with surface defects are automatically identified and immediately discarded.
High chemical resistance
Our surfaces are tested using strict processes to offer high resistance to class 1B chemical agents, according to the definition of the German
CEE DIN-68861-1:81 standard.
FSC® - PEFC – CARB certifications
The initial semi-finished MDF panels come with the FSC® certification or, on request, with the PEFC certification, both of which testify that they are made using wood from responsibly-managed forests or plantations. They are also CARB (California Air Resource Board) certified, based on the ATCM (Airborne Toxic Control Measure) regulation aimed at reducing and monitoring the formaldehyde emissions of wood-based materials used in California.
Very low VOC emissions
Our panels feature extremely low emissions of VOC (Volatile Organic Compounds), i.e. much lower than the minimum quantities normally requested by the furniture industry. VOC are hydrocarbons that – at normal room temperature – are present in a gaseous state. They can have an organic or anthropogenic origin.
Melamine or wood in the same colour/finish on both sides of the panel
The front side of our IXTEX MATT, IXTEX WOOD and ILUX panels is covered by a protective film. The reverse side is in the same colour and finish.
FOR MORE INFO